Toyota 3rd gen 4Runner 4x4 & 2wd Kit
- 4 Items
Regular price
$2,595.95
MAKE -Toyota Tacoma and 4 runner
LIFT - 3 to 4 inches
TIRES PUSHED FORWARD - 3/4"
WIDER PER SIDE - 3.5"
TIRE SIZE RECOMMENDED - 33's with Fenders
WHEEL TRAVEL - 13"
UPPER ARMS – Powder Coated 1.5" 4130 tube with 1" uniball
LOWER ARMS
Our powder coated boxed lower arm made from 10 gauge cold rolled steel Using a hard polyurethane bushings and 1” DOM sleeves at the frame pivot. This kit comes set up so that you can run a coil over, bypass shock and bump stop if wanted.
PARTS INCLUDED
- 4130 upper uniball arms.
- Powder coated boxed lower arms.
- Stainless steel brake lines.
- Limit straps and limit strap tabs.
- Steering extension
- Coil over mounts
- All grade 8 hardware
FEATURES
- Uses stock pivot points
- Increases wheel travel
- Increases track width
- Dual shock ability with bump stop
- Just about endless shock options
- Easy install
- Made in the USA
RECOMMENDED PARTS
- Fiberglass fenders
- Tundra 4x4 axles
Please note that you be required to re-drill the upper shock mount 3 bolt pattern to match the Tacoma pattern.
RECOMMENDED PRODUCTS FOR SALE
|
King 2.5 x 8” Remote Res Dual Rate Coil Over -
|
King 2.5 x 8" Remote Res Free Bleed Shock -
|
|
King 2.5 x 8" Remote Res 2-Tube Bypass Shock -
|
King 2.5 x 8” Remote Res 3-Tube Bypass -
|
|
King 2.0 x 2" Hydraulic Bump Stop with Weld Can - |
Toyota Rear Suspension Parts (springs, hardware, shackles)
|
|
Weld on Bypass Shock Mount - $325.00 |
4x4 Tie Rod Kit - $249.95 |
4x4 Tie Rod Race Kit - $389.95
|
