Toyota Hilux 86 to 95 4x4 Front End Kit
- 3 Items
Regular price
$2,595.95
Year – 86 to 95 & t100 is 96 to 98
Make – Pick up, 4 runner and t100 4x4
Lift – From stock to 3”
Tires Pushed Forward – 5/8”
WIDER PER SIDE – 3.25
TIRE SIZE RECOMMENDED – 33s can run 35s with modification (fiberglass is recommended)
WHEEL TRAVEL – 12” with 4wd
UPPER ARMS
Powder coated 1.5"x .120W 4130 tube with high grade 1" uniball
LOWER ARMS
Our powder coated boxed lower arm made from 10 gauge cold rolled steel Using a hard polyurethane bushings and 1” DOM sleeves at the frame pivot. This kit comes set up so that you can run a coil over, bypass shock and bump stop if wanted. (coil overs are a must.. we do not build a torsion bar set up)
Spindle – Stock (must drill upper ball joint hole to 3/4” )
PARTS INCLUDED
- Powder coated 1.5” 4130 upper uniball arms.
- Powder coated 10 gauge steel boxed lower arms.
- Stainless steel brake lines.
- Limit straps and limit strap tabs.
- Steering extensions.
- All grade 8 hardware
FEATURES
- Uses stock suspension pivot points
- Increases travel
- Increases track width
- Duel shock ability with bump stop
- Easy install
- Made in the USA
https://www.youtube.com/watch?v=Gfl5XTUZvT0
RECCOMENDED PARTS
- Fiberglass fenders
– Pick up runs t100 4x4 axles (your local parts store)
- T100 axles please call
RECOMMENDED PRODUCTS FOR SALE
|
King 2.5 x 8” Remote Res Dual Rate Coil Over -
|
King 2.5 x 8" Remote Res Free Bleed Shock -
|
|
King 2.5 x 8" Remote Res 2-Tube Bypass Shock -
|
King 2.5 x 8” Remote Res 3-Tube Bypass -
|
|
King 2.0 x 2" Hydraulic Bump Stop with Weld Can - |
Toyota Rear Suspension Parts (springs, hardware, shackles)
|
|
4x4 Steering Kit - |
4x4 Shock Mount - |
|
4x4 Tie Rod Kit - |
|
