2005+ Toyota Tacoma 4 Link Kit
- out of stock.
We now offer a complete 4 link suspension kit for the Second and Third generation Tacoma.
Our kit is a true 4 link design that utilizes our 58" long "canoe" style trailing arms. The kit requires the removal of the factory gas tank and installation of a rear mounted fuel cell. The upper and lower 4 link pockets bolt to the stock frame underneath the cab and integrate with the factory carrier bearing cross member. We strongly recommend incorporating the upper shock mounts into the roll cage/bed cage. To maximize wheel travel it is recommended that the factory frame is notched 4" or better yet completely removed and replaced with a new tube structure to allow for the greatest amount of up travel. You will be able to use either a 14" coil over with a 16" bypass shock or a 16" coil over and a 18" bypass shock. Wheel travel will depend on the shock options selected and up to 28" of wheel travel is available.
The kit includes the following parts below.
-Upper and lower trailing arm pockets for the frame and rear 9" axle (they can be modified for the Toyota 8")
-Carrier bearing reinforcement cross brace
- Upper and lower trailing arms
-All heims, uniballs, seals, mis-alignment spacers and bolts
Please note this kit requires extensive fabrication and as stated above will not work with your factory gas tank. We also strongly recommend the use of a 9" rear axle in order to handle the abuse that the truck will be capable of.