|
|
|
|
Ford f150 4x4 2004 and up |
|
Products -
Ford
|
|
|
| The 2004 and up ford f150 front end kit offers you a wider track width
of 4" pr side with option of coilover and bumpstop pr wheel and an
estamated wheel travel of 14" with 4 wheel drive and 37" tires
(fiberglass fenders recommended). The upper arms are billet aluminum
made from 6160. These custom machined arms use 3/4" heims on the inner
pivot points and a 1" heim to replace the stock outer ball-joint. The
lower arms are made from 1/8" 4130 plate, powder coated and are locked
in with a custom machined plates that fill in the stock oval alignment
holes to keep the alignment from being knocked out. This kit comes with
just about everything you need to install and is fairly easy for some
one with some fabrication and welding skills. |
|
|
|
|
|
|
|
|
Kit Includes:
- Billet Aluminum Upper Arms
- 4130 Boxed Plate Powder Coated Lower Arms
- Stainless Steel Tie Rod Extenders
- Custom Shock Tower
- 10" Travel King Coil over w/ Remote Reservoir
- Limit Straps
- All Hardware
- axle upgrade with 930 cv's, adapters, axles,booty's and hardware
- Kit price $4690.00
Extras:
- Steering Upgrade $435.95 (includes tie rods, heims, custom billet clevis, and all hardware)
- Rear Shackles 7.5" and 6.5", powdercoated $199.00 (includes bushings and sleeves)
- Front Bumper Starts at $950, Unpainted (built custom per truck)
- Rear Bumper $850, Unpainted (w/ trailer hitch)
- Front Fenders $440 (installation $400, unpainted)
- Rear Fenders $550 (installation $1095, unpainted)
- Rear Springs (Both Deavers)
- Spring Under $895 Useable 19" travel with notching of frame and removal of rear blocks which gives you 5" more up travel than stock. (requires custom 2 piece driveshaft)
- Spring Over $695 (bolt in rear springs)
- Extended 4x4 Axles(934 Cv's, Custom axles, w/ adapter plate and boots) $Call
- King Hydraulic 2.5" bumpstops with can $275.00
- bumpstop mounting tabs $49.95
|
